[rev_slider alias=”ts-swgs07″ /]

Home » Swing Gates » Swing Gates TS-SWGS07


  • 304/316 stainless steel
  • Brush motor
  • Compatible with any access control system
  • IN/OUT reader option (reader and access control system purchased separately)
  • Various operation modes (access controlled in/out, free egress/entry, one-way access, any other combination)
  • Indicator lights for pass or no pass
  • Indoor/outdoor operation
  • Size and shapes can be customized

Part Numbers

Back to Top

TS-SWGS07-SMsingle movement sliding barrier, standard lane
TS-SWGS07-SM-ADAsingle movement sliding barrier, ADA (wheelchair accessible) lane



Back to Top

Basic Parameters
Finish304/316 stainless steel frame, acrylic flaps
Safetyfail safe (free exit/entry)
Lane width24” [60cm] standard

36” [90cm] ADA / wheelchair accessible

Capacity40 to 50 persons per minute (free egress)

20 to 30 persons per minute (access controlled)

Mechanical operating modefull automatic
Motor type24Vdc brush motor
Directionsingle or bi-directional
Controlled operating modefree entry/exit, controlled entry/exit, no entry/exit, or any combination
Opening/closing time2 seconds to 3 seconds (adjustable)
Operating time after power on10s full automatic
MCBF (mean cycles between failure)more than 3 million
Indicator lightsLED directional arrow, green
LED “X” no pass, red
Controlsdry contact/+12Vdc level or pulse input signal for entry and exit
Tailgating detectionyes
Crawling detectionyes
Wrong way detectionyes
Battery back-up optionyes
Remote controlyes (optional)
Position accuracy± 5°
Operating voltage110Vac/220Vac (±10%) (specify at time of order)
Power consumption24W
Operating environmentindoor, outdoor with rain shield/canopy
Operating temperature14°F to 122°F [-10°C to 50°C]
Storage temperature-4°F to 140°F [-20°C to 60°C]
Operating humidity20% to 95% (non-condensing)
Storage humidity20% to 95% (non-condensing)
Ingress protectionIP54
Physical Characteristics
Standard unit size6.5″(D) x 6.5″(W) x 41.5″(H)
17cm(D) x 17cm(W) x 105cm(H)
ADA / wheelchair accessible unit size6.5″(D) x 6.5″(W) x 41.5″(H)
17cm(D) x 17cm(W) x 105cm(H)
Flap length10″ to 12″ [25.4cm to 30.5cm]
Flap length ADA (wheelchair)16″ to 18″ [40.6cm to 45.7cm]
Weight120 lbs [54.5kg]
Enamel colorblack, gold, bronze
Flap materialacrylic (standard), tempered glass (optional)